VideoSecu Articulating TV Wall

The VideoSecu MW370B is a full motion wall mount for 37″ 55″ TVs up to 165 lbs. This articulating mount supports TV with mounting hole patterns up to 26.8″ horizontally, and 18.1″ vertically (VESA 680X460mm). The tilt controller lets smooth, easy modification to decrease glare and find the perfect angle. Full motion design lets maximum flexibility tilt, spins up to 120 degree side to side and extend the flat panel screen up to 26″ from the wall for perfect view positioning. Integrated cable management design on arm prevents cable pinching. This mount is VideoSecu brand. Report to if the product you received don’t bear VideoSecu logo.

54 of 55 people found the following review helpful:
5.0 out of five stars hard choice for mounting 52″ and 40″ Samsung LCDs, July 16, 2009
By J. Chung “JC” (Plano, TX) See all my reviews
(REAL NAME) This review is from: VideoSecu Articulating TV Wall Mount for Most 37″ 55″ TV, Dual Arm Extends up to 26 Inch From Wall Free HDMI cable 1VH I newly bought two Samsung LCD TVs, 40″ for the master bedroom and 52″ for the family room. Firstly I planned to buy one articulating mount for the master bedroom and one simple titling mount for the family room. But, depending on the quality of this unit, I bought two articulating mounts. Also to flexibility in looking at angles/positions, articulating mounts are great for the initial set up and successive rewiring or substitute of parts (you don’t have to take off the TV; you simply pull it out and the back of the TV is easily accessible).

This unit is heavy (definitely 2 person job to mount the wall plate), hard, and made with high quality materials. Installation was pretty straight forward. Information were somewhat terse (small/tiny diagrams) and not clear (e.G., which screws/bolts/spacers to use if attaching the back beams to the TV), but they weren’t that hard to figure out.

Here are many recommendations:
1) be sure that the back beams are attached to the TV at equal height. If you use the same holes, there’s about 0.125″ play when tightening the bolts. Otherwise, the TV may be not level if the wall plate is level.
2) If you have a low margin of error for the height of the mount (I had to mount them in a fitted cupboards with 1″ gap on all four sides), attach the back beams to the TV 1st and measure the distace between the top of the TV and the point where the beam will “hook” on to the plate. Then figure out where to drill the holes depending on the distance between the point where the beam will “hook” on to the plate and the center of openings for the screws/bolts.
3) generally measure twice and use a high quality level to be sure that the mount is level.

---

50 of 51 people found the following review helpful:
5.0 out of five stars Awesome product and a great value!, June 8, 2009
By D. Erhart (Glendive, MT) See all my reviews
(REAL NAME) This review is from: VideoSecu Articulating TV Wall Mount for Most 37″ 55″ TV, Dual Arm Extends up to 26 Inch From Wall Free HDMI cable 1VH This is an awesome product! it is strong and feels stable when the TV is completely expanded from the wall! It was easy to install and mount the TV. I checked with my local electronics store and they wanted $400 $500 for an articulating mount that was not almost as strong and stable in the store display. I greatly recommend this mount to everyone if you do not intend to use the articulation. The articulation makes it so much easier to make connections on the back of the TV! I can not find words to say how great this product is! The value and strength are the best I have found anywhere!

---

27 of 28 people found the following review helpful:
5.0 out of five stars Great Value For the Price!!!, June 15, 2009
By M. Cortez “xQuizx” (Chi Town) See all my reviews
(REAL NAME) This review is from: VideoSecu Articulating TV Wall Mount for Most 37″ 55″ TV, Dual Arm Extends up to 26 Inch From Wall Free HDMI cable 1VH I bought this product some days ago on Wednesday and received it on Saturday. I had the cheapest shipping so I was quite impressed to get it so quickly.

The item out of the box felt tough and looked great. The directions were easy to understand. There were many of diagrams and there were pictures for each nut and screw size. There was a vast array of screw sizes also as different lengths.

I have a 42 inch LG plasma and the brackets were easy to install. What is nice is the bracket came with screw extenders because the mount couldn’t screw flush behind the tv, the tv had many screws that poked out the back.

Installation of the mount to the wall was easily also. You’ll need a drill to make the initial holes also as a ratchet to tighten the wall bolts. The mount has a leveler on it but we used our own leveler to level the system.

The brackets on the tv easily sit on the mount and voila you’re done.

There is enough space to plug wires in the back of the tv infront of the mount. I could recommend using the spacers for the extra room. It’s amazing how far the tv swings out and to the side. I’ll have to post pictures of my tv.

All in all this is a great system for the value ($75), hands down. I could certainly buy another at some point.

Cheers!

---